Enraf Tanksystem - Gauging and Sampling Equipment

Enraf Tanksystem is the world's leading supplier of portable level gauging and sampling equipment for marine applications, as well as for the oil and petrochemical industry. Our products include closed gauging and restricted gauging equipment for hydrocarbons, chemicals and petroleum products, as well as samplers for hazardous liquids and chemicals.

Enraf Tanksystem, a member of Honeywell Process Solutions, has supplied equipment for more than 7,000 tankers, barges and tank farms worldwide.

HERMetic UTImeter Otex - portable liquid level gauge

The HERMetic UTImeter Otex is a portable liquid level gauge operated under open conditions on petroleum and chemical tanks where open gauging is permitted. The sensor is calibrated once at the factory and does not require subsequent calibration. The temperature transducer is a RTD element, which are stored inside the sensor. The sensor is sending true temperature values to the electronic box. Therefore changing a sensor or a tape does not require a new calibration. The unit is used for custody transfer, inventory control measurement and free water detection on shore tanks. The HERMetic UTImeter Otex is set on the open gauging hatch.

HERMetic UTImeter Gtex 2000 - gas tight liquid level gauge

The HERMetic UTImeter Gtex 2000 is a portable gas tight liquid level gauge designed to operate on top of closed petroleum and chemical tanks. The unit is used for verification of the fixed gauging system, temperature measurement, inventory control measurement and free water detection on shore tanks.

Connected to a HERMetic vapour control valve fixed on the tank, the HERMetic UTImeter Gtex 2000 avoids any gas release during operation. The unit enables 4 measurements in one single operation:

• Ullage
• Temperature
• Oil-water interface level
• Innage, reference height (manual detection of dip datum plate)

HERMetic sampler GT or GT Chem

For the HERMetic sampler GT or GT Chem, the transfer of the liquid from the sampling bottle to a laboratory bottle occurs by gravity through a special distribution block. The HERMetic Sampler GT or GT Chem can be fitted to any kind of 2in ball valve with special adapters.

HERMetic Onecal - intrinsically safe portable digital thermometer

The HERMetic Onecal has been designed for use in hazardous environments with outstanding characteristics regarding safety, easiness of operation, accuracy, reliability and cost efficient maintenance.

Onecal stands for one reference point only for calibration. The reference point is the ice point, which can easily be reproduced, thus simply pushing a button creates the calibration. The characteristics of the RTD sensor are stored in the memory of the instrument and are the same for any individual sensor. Therefore a change of a sensor requires only an offset calibration.

Replacing the cable only does not require a new calibration because of the built-in automatic cable compensation routine. The modular design of the HERMetic ONECAL makes the exchange of components extremely easy and cost-efficient as no special training or tools are required.

Intrinsically safe and manufactured equipment

With headquarters in Switzerland since 1985, Enraf Tanksystem has a network of 60 agents and 15 service stations worldwide. Enraf Tanksystem has also a subsidiary in the USA.

Our goal is to build up a long-term relationship with our customers and to put their needs in the centre of all our activities. All our equipment is intrinsically safe and manufactured for use in classified hazardous environments (Zone 0) onboard vessels or in storage tank farms.

As an ISO 9001 certified company, we are dedicated to fulfil all the needs of our demanding customers who operate in classified areas according to high standards regarding safety, reliability and accuracy.