Alltec Corporation - Lightning Protection, Grounding Systems, Transient Voltage Surge Suppressors, and Instrumentation Shelters

Alltec Corporation is a global leader in the design, manufacture and installation of lightning protection, grounding systems and transient voltage surge suppression technology.

Founded in 1991, we have focused continuously on innovating new technology, improving product quality, and enhancing customer service. As 'Solution Providers for an Energized World', we offer a comprehensive facility protection approach to solving the oil and gas industry's most difficult lightning, grounding and power quality problems.

TERRAEVAL™ ADVANCED SOLUTION ASSESSMENT

TerraEval advanced lightning solution assessment provides customized lightning protection and grounding designs and specifications complying with IEEE standards 80, 81, 142, and 1100; UL96A; NFPA 780; API2003; BS6651; UNE 21186; and NFC 17102.

• Performance of tests (soil resistivity and ground system impedance)
• Validated model utilization to perform evaluation of step/touch potential, conductor size, fault current analysis, maximum ground potential rise, and assessment of lightning shielding system
• Recommendations for grounding system upgrades, enhancing lightning shielding of facility and surge protection of sensitive electronic equipment

TERRASTAT™ LIGHTNING DISSIPATION TERMINALS

TerraStat lightning dissipation terminals incorporate electrodes that break down into corona before streamers can form, thereby lowering accumulated charge and postponing streamer generation.

• Utilizes the point discharge principle to mitigate direct lightning strikes
• UL listed and recommended as per API2003
• Lightweight, corrosion and high wind resistant

POWERTRIP™ TRANSIENT VOLTAGE SURGE SUPPRESSORS

PowerTrip transient voltage surge suppressors incorporate Optimal Response Circuit™ technology years ahead of any other devices on the market today. Utilizing proprietary electro-chemical encapsulation, PowerTrip™ transient voltage surge suppressors dissipate large amounts of surge energy internally.

• Discrete 'all mode' circuitry and industry leading 'let-through' voltage performance
• 25-year free replacement warranty
• Response/recovery time <1 nanosecond
• Tight clamping levels, and sine wave tracking

TERRAWELD™ EXOTHERMIC WELDING SYSTEM

TerraWeld™ exothermic welding system provides simple, cost effective, permanent connections using a high-temperature exothermic reaction.

• Requires no external heat source, portable
• Fault tolerant, highly conductive, corrosion resistant, will not loosen
• UL listed

TERRADYNE™ ELECTROLYTIC GROUNDING SYSTEM

TerraDyne electrolytic grounding system provides efficient electrical grounding with continuous low resistance/low impedance.

• UL and cUL listed, corrosion resistant, maintenance free 30-year service warranty
• Rated for high fault currents
• Replaces multiple conventional rods
• Vertical and horizontal models available
• Produces effective, stable, year round ground reference

TERRAFILL™ GROUND ENHANCEMENT MATERIAL

TerraFill ground enhancement material provides a simple method to economically tackle difficult grounding situations.

• Resistivity <1Ω/cm: freezing increases resistance less than 10%
• Will not expand, shrink, dissolve or decay: contains corrosion inhibitor
• Environmentally friendly: meets EPA requirements
• Self-compacting, easy to install
• Does not require mixing with water

TERRASTREAMER™ EARLY STREAMER EMITTING TERMINALS

TerraStreamer early streamer emitting terminals are a preferred protection method for large area structures.

• Certified to UNE std 21186 and NFC std 17102, with a five-year warranty
• Designed and constructed as a single unit with latest advanced electronic circuitry
• Stainless steel encased, suitable for corrosive atmospheres
• Withstands electrical discharge current of 100kA
• Protection zone up to 800 times that of traditional single lightning rod

AEGIS™ INSTRUMENTATION SHELTERS

Aegis instrumentation shelters are designed to provide the utmost in protection, durability and aesthetics. They are a particularly cost-effective and appropriate solution for speedy installation of instrumentation and control stations. Lightweight, modular construction makes them ideal for both rooftops and ground level locations.

• Prefab panels with PUF insulation 40kg/m³, noncombustible material, lightweight- only 0.8kg/m²
• Extruded corner panels, CamLock® and Vertilock® interlocking system
• Antistatic flooring with load capacity of 1,500kg/m
• Insulated panel doors, double gasket and three-position lock system
• Suitable for extreme climates, -15°C to +55°C, 99%RH, 180km/hr wind velocity
• Custom equipment integration - including: electrical and HVAC, back-up power, EMI/RFI shielding, cable trays and telecoms equipment
• Internal and external lightning protection and grounding systems
• Installation services and training available